SSI-2020 Raised Cab Forklift / X-500MR

SSI-2020

Raised Cab Forklift
X-500MR

  1. Home
  2. Heavy Duty Forklift
  3. Raised Cab Forklift
  4. X-500MR Details
X-500MR ArrayClick Image to Enlarge

Taylor® X-500MR

The X-500MR is capable of handling long duty cycles with a lift capacity of 50,000lbs at 50-in Load Center. This machine is specially designed with a raised operator base to provide added visibility over taller loads. Taylor heavy duty forklifts are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.
Print Friendly

  • Capacity: 50000 lbs / 22680 kg
  • Capacity (MT): 23
  • Load Center (in): 50 in. / 1270 mm
  • Wheelbase (in): 156.0 in. / 3962 mm
  • Engine: QL9 -C250 4F
  • Transmission: TE-17 3-sp. APC
  • Mast (ft/Type): 18-ft UV 2-Stage
  • Carriage Att. (in/Type): C-100
  • Forks (in): 5x10x96
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 14.00 X 25-24PR

Standard Features: X-500MR

  • 18-ft ULTRA-VU 2-Stage Mast (197-in lowered height)
  • 100-in Pin-type “C” Carriage with Side Shift
  • 5-in X 10-in X 96-in pin mounted Forks
  • Cummins QSL9 250Hp Tier-4 Final diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator
  • Dana TE-17 3-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Axeltech PRLC-1794 HD planetary Drive Axle with Wet Disc Brakes
  • Taylor 450 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 14.00 X 25 – 24PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Hinged engine hood, side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and defrost
  • Tinted glass with front and rear windshield wipers
  • Fully adjustable air ride swivel seat
  • Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) …see next page for additional info
  • TaylorTrak Pro - Advanced Fleet Telematics hardware
  • 7-in touch screen color display
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (“A” pillar mounted)
  • (2) LED work lights (mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

Vehicle Information Package

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
X-500MR Heavy Duty ForkliftBrochure View *Brochure will open in a new window
View Gallery *Image Gallery will open in a new window
No video available at this time

Taylor Forklifts of North Carolina provides Heavy Duty Forklift sales, parts, and service for the state of North Carolina. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us