SSI-2020 RO-RO Forklift / X-720RR


RO-RO Forklift

X-720RR ArrayClick Image to Enlarge

Taylor® X-720RR

The X-620RR and X-720RR are specifically designed for use on RORO (Roll On/Roll Off) ships. RORO ships have built-in ramps which allow the cargo to be "rolled on" and "rolled off" the ship when in the port. With an overall height of only 112-inches (top of cab) and an overall width of 135-inches, the X-620RR and X-720RR are capable of operating within confined spaces. The offset cab features dual operating controls and a seat capable of rotating 180° degrees to allow the operator to face the direction of travel.
Print Friendly

  • Capacity: 72000 lbs / 32659 kg
  • Capacity (MT): 33
  • Load Center (in): 48 in. / 1219 mm
  • Wheelbase (in): 185.0 in. / 4699 mm
  • Engine: QSL9 - C250 4F
  • Transmission: TC-36 4-sp. APC
  • Mast (ft/Type): 10' DL
  • Carriage Att. (in/Type): C-120 SSFD
  • Forks (in): 5x10x96
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 16.00 x 25 - 36PR

Standard Features

  • 10-ft. Direct Lift 2-Stage Mast (112-in lowered height)
  • 120-in Pin-type "C" Carriage
  • 5-in X 12-in X 96-in pin mounted Forks
  • Cummins QSL9 250Hp Tier-4 Final diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension with TaylorMax Precleaner)
  • Dana TC-36 4-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-102 planetary Drive Axle with Wet Disc Brakes
  • Taylor 650/700 welded steel Steer Axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 16.00 X 25 - 36PR bias pneumatic drive and steer tires


  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolted on piece counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Gull Wing engine hood, side service doors and tilting cab open to expose drive train for ease of maintenance.


  • Enclosed Offset 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 180° rotating operator platform
  • Multifunction Joystick mounted on right adjustable arm rest (11-button command with integrated directional shift control). Mini-Wheel steering mounted on left arm rest
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color an
  • d number coded.
  • Dual USB charging ports


  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (fender mounted)
  • (2) rear facing LED work lights (cab mounted)
  • (2) LED work lights (mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
X-720RR Heavy Duty ForkliftBrochure View *Brochure will open in a new window
View Gallery *Image Gallery will open in a new window
Product Video
X-720RR Product Video
Play Video

Taylor Forklifts of North Carolina provides Heavy Duty Forklift sales, parts, and service for the state of North Carolina. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us