SSI-2020 Log Stacker / XLS-1000

SSI-2020

Log Stacker
XLS-1000

XLS-1000 ArrayClick Image to Enlarge

Taylor® XLS-1000

Taylor Big Red has been designing, engineering and building equipment for the Forest Products industry for over 80 years. Taylor is currently manufacturing the 7th generation of our innovative, industry leading Forest Products Material handling Equipment. The Taylor Logstacker is used extensively throughout the U.S. Timber Industry and is renowned for its robust construction and rugged dependability.
Print Friendly

  • Capacity: 100000 lbs / 45359 kg
  • Capacity (MT): 45
  • Load Center (in): 48 in. / 1219 mm
  • Wheelbase (in): 288.0 in. / 7315 mm
  • Engine: Volvo 12.8L TAD1374VE - 503HP
  • Transmission: 6000 Series 4-SP. APC
  • Mast (ft/Type): 24 R
  • Carriage Att. (in/Type): Log Clamp w/Kickers
  • Forks (in): 
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: Drive: 37.25 x 39 - 44PR; Steer: 21.00 x 25 - 32PR

Standard Features:

  • 24-ft. Rigid Mast
  • Log clamp with kickers
  • 10-in X 108-in pin mounted Forks
  • Volvo 12.8L TAD1374VE - 503HP Diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana 6000 4-Speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-111W HD planetary drive axle with wet disc brakes
  • Taylor 600 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 37.25 X 39 - 44PR bias pneumatic drive tires
  • 21.00 X 25 - 32PR bias pneumatic steer tires

CHASSIS:

  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolt-on counterweight
  • Durable access platform with handrails
  • Lockable Fuel Cap
  • Large engine bay doors and side service doors open to expose drive train for ease of maintenance

CAB:

  • Enclosed, steel all-welded cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails and is isolation mounted for noise and vibration reduction)
  • Air conditioned, heat/defrost and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride seat mounted on a rotating platform with 45° of total rotation
  • Arm rest mounted mini-wheel steer control
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-inch Display
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.

ELECTRICAL:

  • 24-volt electrical system with 75 amp alternator
  • Dual 220 amp-hour heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (6) forward facing LED work lights (cab mounted)
  • (4) rear facing LED work lights
  • (1) LED work lights (mast mounted)
  • (1) LED step light
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

VIP:

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
No brochure available at this time
View Gallery *Image Gallery will open in a new window
No video available at this time

Taylor Forklifts of North Carolina provides Log Stacker sales, parts, and service for the state of North Carolina. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us