SSI-2020 Reach Stacker / XRS-9972

SSI-2020

Reach Stacker
XRS-9972

XRS-9972 ArrayClick Image to Enlarge

Taylor® XRS-9972

The Taylor XRS-9972 Reachstacker is designed to handle Loaded Containers stacked up to 99,000-lbs / 5-High first row, 90,400-lbs / 4-High second row and 3-High third row. This truck features a Heavy Duty Taylor designed Top-pick 4-point spreader with up to 185 degree rotation, hydraulic cab positioning, 388 HP Tier 4 Final diesel engine, and End-User diagnostics that allow the customer to customize operating parameters and troubleshoot most codes without the need for a service call. The Taylor Big Red Reachstacker is a versatile machine that can be configured to handle containers, breakbulk, steel coil, magnet attachments and much more. Taylor Big Red... Engineering the Ultimate Lifttruck!
Print Friendly

  • Capacity: 90k-99k lbs / 40823-44906 kg
  • Capacity (MT): 0
  • Load Center (in): 81 in. / 2057 mm
  • Wheelbase (in): 258.0 in. / 6553 mm
  • Engine: Volvo 12.8L- TAD1371VE-388 4F
  • Transmission: TE-32 4-sp. APC
  • Mast (ft/Type): 5-Hi Boom
  • Carriage Att. (in/Type): Varies
  • Forks (in): 
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 18.00 x 25 - 40PR

Standard Features: XRS-9972

  • Telescopic Boom for stacking 5-High 1st row, 4-High 2nd row and 3-High 3rd row (9-ft 6-in Loaded)
  • 20-40 ISO Container Handling Attachment, with rotation, side shift, expansion/retraction and damping
  • Accumulator in Lift Circuit
  • Volvo 12.8L TAD1371VE 388-HP Tier 4-Final Diesel (Turbocharged)
  • Fuel/Water separator
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (with TaylorMax Precleaner)
  • Dana TE-30 5-speed powershift transmission
  • Powertrain protection system for engine and transmission
  • Kessler D-102W HD planetary drive axle with wet disc brakes
  • Taylor 800 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)

Chassis

  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Removable deck plates open to expose drive train for ease of maintenance

Cab

  • Climate Controlled sliding (hydraulic/electric) all-welded steel center mount cab (includes right hand and left hand access doors with rear exit window and dome light)
  • 66,000 BTU total heating with front and rear defrosting, cab pressurizer and fresh air intake
  • 40,000 BTU air conditioning and two circulation fans
  • Exterior Cab Positioning Switch allows the cab to be moved while the machine is powered down
  • Tinted glass with front, rear, and top windshield wipers
  • Front and Top windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction joystick, with integrated directional shift control, mounted on adjustable arm rest
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) …see next page for additional info
  • TaylorTrak Pro - Advanced Fleet Telematics hardware
  • 7-in touch screen color display
  • Rear visibility aid camera system
  • The 2-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 110 amp alternator
  • Dual heavy-duty batteries
  • Dual Battery disconnect/lock-out switch
  • 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on boom)
  • (4) Chassis mounted LED work lights
  • (4) Boom mounted LED work lights
  • (2) Dedicated Twistlock LED work lights
  • (2) LED step lights
  • Stop-Tail-Turn Lights
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Keyswitch-actuated push button start
  • Air Horn with 2-gal air tank (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

Vehicle Information Package

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
XRS-9972 Container HandlerBrochure View *Brochure will open in a new window
View Gallery *Image Gallery will open in a new window
No video available at this time

Taylor Forklifts of North Carolina provides Container Handler sales, parts, and service for the state of North Carolina. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us